Favorte|Feedbakc|Contact Us Welcome to Zhongshan Jinzhi laser equipment Co. Ltd website, we wholeheartedly for your service, telephone number£º0760-88639997!

Advisory hotline0760-88639997


Contact Us

Zhongshan Jinzhi laser equipment Co. Ltd.
Contact£ºMr. Li
Mobile phone£º13380877007

Your present position: Home >> News detailNews detail

Application of metal laser cutting machine
Publisher:admin Add time£º2016/7/20 Browsing times£º1547
Metal laser cutting machine, the current metal laser cutting machine is divided into small and medium power and high-power cutting machine. Small and medium power cutting machine in the 1000W below, the price is absolutely cheap, cutting the thickness of the metal individual will not exceed 10 thick. And high power laser cutting machine individual in the 1000W or even several thousand watts. Cutting thickness, the price is relatively high, individual only large manufacturers such as automotive parts processing.
Metal laser cutting machine individual small and medium power metal cutting machine can cut 1, carbon steel plate cutting. The maximum thickness of the carbon steel plate can be cut by the modern laser cutting system, which is close to the 20mm, and the cutting of the thin plate can be as narrow as 0.1mm. Laser cutting of low carbon steel and its minimal heat affected zone, and cutting on flat, lubrication, good verticality. Laser cutting machine for high carbon steel, laser cutting edge quality is better than low carbon steel, but its heat affected zone is larger. Laser metal laser cutting machine laser machine maximum cutting depth of 10mm. 2, stainless steel cutting. Laser cutting is easier to cut stainless steel sheet. The maximum thickness of the stainless steel cutting system with high power YAG laser has been up to 4mm. We developed a small power YAG laser cutting system for cutting stainless steel thickness up to 4mm. 3, alloy steel plate cutting. Most of alloy steel can be used in laser cutting, the cutting edge of good quality. However, the tool steel and hot die steel with high tungsten content can be melted and stuck in the laser cutting. 4, aluminum and alloy sheet metal cutting. Aluminum cutting is a melt cutting, metal laser cutting machine to assist gas to the cutting area of the melt blown away, can achieve a better view of the quality. At present, the maximum thickness of the cutting aluminum plate is 1.5mm. 5, other metal materials cutting. Copper is not suitable for laser cutting, cutting is very thin. Most of titanium and titanium alloys and nickel alloys can be cut by laser. Non metallic materials.